small bilge pump filter / oil separator for bilge pump

Small bilge pump filter oil separator for pump - water filter to permanently bind oil and chemical residues.

Machine oils, gear oil, and fuels accumulate in the bilge water of a boat and are the main causes of pollution in bodies of water. Therefore, filtering the bilge water is indispensable.

Small powerful oil separator for pump / bilge pump filter for the sake of the environment

The small bluAqua oil separator / bilge pump filter is equipped with a powerful oil and chemical absorbent for soaking up oils and chemicals. The special properties of this material ensure that all these and other hydrophobic liquids are permanently bound.

Pump / bilge water protection filter

This bilge water protection filter filters oils, gasoline, or diesel from the bilge water and uses a material developed in Germany which, due to its properties, attracts oil molecules and permanently binds them in the cartridge. This filter cartridge meets the oil binding and retention requirements according to the DEKRA test report (100 g filter material binds 0.655 liters of oil). It has a capacity of 500 g, which corresponds to the average oil amount in approx. 12,500 liters of bilge water / pump water .

Easy installation - great effect

The oil separator / bilge pump filter is simply installed between the bilge pump and the onboard water outlet and thus contributes to the preservation of our environment. Used filter cartridges must be disposed of properly as oil-contaminated waste.

Special features:

• Removes oils, chemicals, and other hydrophobic liquids from the water.
• High and rapid adsorption capacity, over 6 times its own weight (100g binds 0.655 liters of oil).
• 3/4 inch BSP brass internal thread connections, intended for installation on the pressure side of the bilge pump.

Contents:

• 5 inch filter housing with 3/4 inch threaded connection internal thread (Please order adapter if necessary!!!)
• Housing wrench
• Mounting bracket
• 5 inch oil separator filter cartridge